Driveway Kerb Ramps in Rolleston | KERBY.NZ
A smoother way into your Rolleston driveway
KERBY is a purpose-built aluminium driveway kerb ramp system designed for permanent installation over suitable existing kerb profiles.
A smoother way into your Rolleston driveway
KERBY is a purpose-built aluminium driveway kerb ramp system designed for permanent installation over suitable existing kerb profiles.
KERBY uses high-strength T6 aluminium extrusion, designed in Selwyn and manufactured in New Zealand.
Instead of your wheels dropping abruptly over the kerb, KERBY creates a smoother, controlled transition from road to driveway.
The result?
Less impact. Less scraping. Smoother access.
And because KERBY is professionally installed, it isn't just a piece of material thrown across the kerb and left there.
It's measured, configured, secured and finished for the actual driveway.
Real KERBY installations in Rolleston
KERBY isn't theoretical.
Real KERBY installations in Rolleston
KERBY isn't theoretical.
We've installed a range of configurations throughout Rolleston, including:
Straight installations
For straightforward driveway entrances requiring consistent full-width coverage.
Curved installations
KERBY can be configured around driveway geometry, including convex and concave curves.
Tight curves
Some Rolleston driveways need more than a gentle bend. Multi-piece and mitred configurations can accommodate tighter changes of direction.
Full-width installations
Wider driveways can use multiple KERBY sections to provide continuous coverage across the entrance.
Custom configurations
Every driveway is different. KERBY can be configured using multiple sections to achieve the required overall width and shape.
KERBY installations around Rolleston
KERBY has been installed across Rolleston in a variety of driveway configurations.
KERBY installations around Rolleston
From new subdivisions to established residential properties, KERBY has been installed across Rolleston in a variety of driveway configurations.
We've worked with:
-
New subdivision entrances
-
Existing residential driveways
-
Straight kerbs
-
Curved entrances
-
Wide driveways
-
Tight driveway turns
-
Utes and everyday vehicles
-
Trailers and lifestyle vehicles
And because installation is local, the solution can be assessed against the actual driveway, rather than trying to make a standard product fit from a photograph.
Choose your KERBY configuration
KERBY sections are available in modular lengths from 1 metre through to 10 metres, allowing you to build the coverage your driveway actually needs.
Choose your KERBY configuration
KERBY sections are available in modular lengths from 1 metre through to 10 metres, allowing you to build the coverage your driveway actually needs.
For example:
1m + 4m = 5m
2m + 4m = 6m
Multiple sections can be combined to achieve wider coverage, while curves can be created using mitred sections.
Optional finishes
KERBY can also be customised with:
Powdercoating
Choose a professional powdercoated finish to complement your property.
Glow Stripe
Add high-visibility marking for improved visibility around the driveway entrance.
Why choose KERBY in Rolleston?
MORE THAN JUST A RAMP it’s Designed in Selwyn
Why choose KERBY in Rolleston?
Designed in Selwyn
KERBY was developed around the real kerb profiles and driveway conditions found locally.
Made in New Zealand
The KERBY system uses high-strength T6 aluminium extrusion manufactured in New Zealand.
Professionally installed
KERBY.NZ supplies and professionally installs the system locally.
Built for the actual driveway
Straight, curved, wide, narrow or complicated, the system can be configured around the entrance.
Locally backed
You're dealing directly with the local supplier and installer rather than an anonymous online seller.
INSTALLATION AREAS
Selwyn & Canterbury
KERBY.NZ supplies and professionally installs driveway kerb ramps throughout Rolleston, Lincoln, West Melton, Prebbleton, Selwyn, Pegasus, Ashburton and surrounding Canterbury areas.
BUILT AROUND YOU
Custom Installation
Straight runs, slight curves, tight curves, multiple sections and custom configurations. KERBY can be adapted on site to suit the actual driveway.
Not sure what configuration you need?
That's where a local assessment helps.
Not sure what configuration you need?
That's where a local assessment helps.
A driveway might look straightforward from the street but have a subtle curve, changing width or awkward transition that affects the ideal KERBY configuration.
We'll look at the actual entrance and recommend the most practical solution.
And because KERBY is modular, the answer doesn't necessarily have to be a single piece.
KERBY Rolleston: built for a smoother entrance
You don't have to accept the driveway bump as part of owning a house in Rolleston.
KERBY Rolleston: built for a smoother entrance
You don't have to accept the driveway bump as part of owning a house in Rolleston.
KERBY turns an abrupt kerb transition into a smoother, engineered driveway entrance designed for everyday vehicle access.
If your Rolleston driveway gives your car, ute or trailer a thump every time you come home, let's fix the transition.
READY TO FIX YOUR DRIVEWAY?
Stop dealing with scraping, jolting, and awkward driveway angles every single day.
KERBY™ delivers a smoother, stronger, and more permanent solution designed specifically for NZ driveways and semi-mountable kerbs. Professionally installed, built to last, and made to look good doing it.
Send through a photo of your driveway and let’s see what’s possible.
📸 Send a Driveway Photo
The fastest way to get started. Send a few photos of your driveway and we’ll assess the best KERBY™ solution for your access point.
💬 Ask a Question
Not sure what option you need? Ask anything about installation, fitment, pricing, or driveway suitability.
📅 Request a Quote
Ready to fix the problem properly? Request a free quote for your driveway installation today.
KERBY Driveway Kerb Ramps in Rolleston
Rolleston has plenty of new subdivisions, semi-mountable kerbs and driveway entrances that can be hard on vehicles. KERBY provides a permanent aluminium driveway kerb ramp solution, professionally installed to create a smoother transition between the road and your driveway.
Designed in Selwyn, made in New Zealand and installed locally, KERBY is built around the way Rolleston driveways actually work.
The Rolleston driveway kerb problem
If you've driven around Rolleston, you'll know the kerbs.
Many residential streets use semi-mountable kerb profiles that work perfectly well for road drainage and construction, but can create an abrupt transition into a driveway.
That can mean:
-
A sharp bump as the front wheels drop onto the driveway
-
Scraping underneath lower vehicles
-
Extra impact through tyres, wheels and suspension
-
Difficult access for trailers and boats
-
An awkward transition for wider vehicles
-
Increased noise when entering and leaving the property
You can slow down, approach at an angle and hope for the best.
Or you can fix the transition.