Driveway Kerb Ramps in Ashburton | KERBY.NZ
Real KERBY installations in Ashburton
KERBY isn't theoretical.
A real KERBY installation in Ashburton
KERBY has already been installed in Ashburton, including straight driveway entrances.
The installation shown here demonstrates a clean, full-width solution for a straightforward driveway configuration.
But straight is only one option.
KERBY can also be configured for:
-
Straight entrances
-
Slight curves
-
Convex curves
-
Concave curves
-
Tight curves
-
Wide entrances
-
Multi-piece installations
-
Custom driveway layouts
KERBY installations around Ashburton
KERBY has been installed across Ashburton in a variety of driveway configurations.
Built for Ashburton and Mid Canterbury
KERBY is suitable for a range of properties and vehicle requirements.
Residential driveways
Create a smoother transition for everyday cars, SUVs and utes.
Lifestyle properties
Where driveway width and vehicle size can make kerb transitions more challenging.
Trailers and boats
A smoother approach can make access easier for longer vehicles.
Wide entrances
Multiple KERBY sections can be combined for wider driveway coverage.
Curved entrances
Mitred sections can follow changing driveway geometry.
Choose your KERBY configuration
KERBY sections are available in modular lengths from 1 metre through to 10 metres, allowing you to build the coverage your driveway actually needs.
Choose your KERBY configuration
KERBY sections are available in modular lengths from 1 metre through to 10 metres, allowing you to build the coverage your driveway actually needs.
For example:
1m + 4m = 5m
2m + 4m = 6m
Multiple sections can be combined to achieve wider coverage, while curves can be created using mitred sections.
Optional finishes
KERBY can also be customised with:
Powdercoating
Choose a professional powdercoated finish to complement your property.
Glow Stripe
Add high-visibility marking for improved visibility around the driveway entrance.
Why choose KERBY in Ashburton?
MORE THAN JUST A RAMP it’s Designed in Canterbury
Why choose KERBY in Ashburton?
Designed in Selwyn
KERBY was developed around real New Zealand kerb and driveway conditions.
Made in New Zealand
The system uses high-strength T6 aluminium extrusion manufactured in New Zealand.
Professionally installed
KERBY.NZ supplies and professionally installs the system in Ashburton and wider Canterbury.
Configurable
Straight, curved, wide or unusual, KERBY can be configured to suit the driveway.
Locally backed
You deal directly with the supplier and installer rather than an anonymous online seller.
Not sure what configuration you need?
That's where a local assessment helps.
Local installation, without the guesswork
Every driveway is different.
The width, kerb profile, approach angle and shape can all influence the ideal KERBY configuration.
That's why professional installation matters.
KERBY.NZ can assess the actual driveway and recommend the most practical configuration.
And because the installation is mobile, custom adjustments can be made where necessary.
READY TO FIX YOUR DRIVEWAY?
Stop dealing with scraping, jolting, and awkward driveway angles every single day.
KERBY™ delivers a smoother, stronger, and more permanent solution designed specifically for NZ driveways and semi-mountable kerbs. Professionally installed, built to last, and made to look good doing it.
Send through a photo of your driveway and let’s see what’s possible.
📸 Send a Driveway Photo
The fastest way to get started. Send a few photos of your driveway and we’ll assess the best KERBY™ solution for your access point.
💬 Ask a Question
Not sure what option you need? Ask anything about installation, fitment, pricing, or driveway suitability.
📅 Request a Quote
Ready to fix the problem properly? Request a free quote for your driveway installation today.
KERBY Ashburton: built for a smoother entrance
You don't have to accept the driveway bump as part of owning a house in Ashburton.
KERBY Ashburton: smoother access, professionally installed
If your Ashburton driveway gives your vehicle a daily thump, there's a better way across the kerb.
KERBY creates a smoother, engineered transition designed for everyday vehicle access.
Designed in Selwyn. Made in New Zealand. Professionally installed in Ashburton.
INSTALLATION AREAS
Selwyn & Canterbury
KERBY.NZ supplies and professionally installs driveway kerb ramps throughout Rolleston, Lincoln, West Melton, Prebbleton, Selwyn, Pegasus, Ashburton and surrounding Canterbury areas.
BUILT AROUND YOU
Custom Installation
Straight runs, slight curves, tight curves, multiple sections and custom configurations. KERBY can be adapted on site to suit the actual driveway.
A smoother way into your Ashburton driveway
KERBY is a purpose-built aluminium driveway kerb ramp system designed for permanent installation over suitable existing kerb profiles.
A smoother way into your Ashburton driveway
KERBY is a purpose-built aluminium driveway kerb ramp system designed for permanent installation over suitable existing kerb profiles.
Built from high-strength T6 aluminium extrusion, KERBY is designed in Selwyn and manufactured in New Zealand.
Instead of dropping abruptly over the kerb, the wheels transition gradually onto the driveway.
The result:
Smoother access. Less impact. Less scraping.
KERBY is professionally installed so the configuration can be matched to the actual driveway rather than relying on a generic one-size-fits-all solution.
KERBY Driveway Kerb Ramps in Ashburton
Ashburton driveways can have the same problem as those across Selwyn: a hard, abrupt transition between the road and driveway. KERBY provides a permanent aluminium driveway kerb ramp solution designed to make that transition smoother.
Designed in Selwyn, made in New Zealand and professionally installed in Ashburton, KERBY brings a purpose-built driveway solution to properties throughout Mid Canterbury and wider Canterbury.
The Ashburton driveway kerb problem
That familiar driveway bump might only last a second.
But if you drive over it every day, that's a lot of impacts.
Depending on the vehicle and driveway, a harsh kerb transition can contribute to:
-
A noticeable jolt through the vehicle
-
Scraping underneath lower vehicles
-
Impact through tyres and wheels
-
Suspension loading
-
Difficult trailer access
-
Awkward entry for wider vehicles
-
Noise and vibration
It's easy to accept it as part of the driveway.
It doesn't have to be.