Driveway Kerb Ramps in Pegasus | KERBY.NZ
KERBY installations around Pegasus
KERBY has been installed across Pegasus in a variety of driveway configurations.
Straight into a curve? KERBY can follow it.
One of the advantages of the KERBY modular system is that the driveway doesn't have to be perfectly straight.
A Pegasus driveway might start with a straight section before changing direction.
KERBY can follow that transition.
Configurations can include:
Straight sections
For conventional driveway entrances.
Slight curves
For gentle changes in direction.
Convex curves
Where the driveway bows outward.
Concave curves
Where the entrance curves inward.
Tight curves
Using additional sections and tighter mitres where required.
Straight-to-curve transitions
A straight run can transition into a curve without abandoning the ramp system.
The driveway sets the geometry. KERBY is configured to suit it.
Choose your KERBY configuration
KERBY sections are available in modular lengths from 1 metre through to 10 metres, allowing you to build the coverage your driveway actually needs.
Choose your KERBY configuration
KERBY sections are available in modular lengths from 1 metre through to 10 metres, allowing you to build the coverage your driveway actually needs.
For example:
1m + 4m = 5m
2m + 4m = 6m
Multiple sections can be combined to achieve wider coverage, while curves can be created using mitred sections.
Optional finishes
KERBY can also be customised with:
Powdercoating
Choose a professional powdercoated finish to complement your property.
Glow Stripe
Add high-visibility marking for improved visibility around the driveway entrance.
Why choose KERBY in Pegasus?
MORE THAN JUST A RAMP it’s Designed in Canterbury
Why choose KERBY in Pegasus?
Designed in Selwyn
KERBY was developed around real New Zealand kerb profiles and driveway conditions.
Made in New Zealand
The system uses high-strength T6 aluminium extrusion manufactured in New Zealand.
Professionally installed
KERBY.NZ supplies and professionally installs the system in Pegasus and surrounding Canterbury areas.
Configurable
Straight, curved, wide or unusual, KERBY can be configured around the actual entrance.
Custom finishes
Powdercoating and Glow Stripe options allow the finished installation to be tailored to the property.
Not sure what configuration you need?
That's where a local assessment helps.
Make the ramp fit the driveway
A standard straight ramp isn't always the best answer.
The actual driveway might curve.
It might widen.
It might change direction.
Or it might simply need more coverage than one section can provide.
KERBY is designed as a modular system, so multiple sections can be combined and configured to suit.
And because installation is mobile, custom adjustments can be made on site where required.
If the driveway throws a curveball, KERBY can usually throw one back.
KERBY is Built for Pegasus driveways
KERBY can suit a range of Pegasus properties and vehicle requirements.
Built for Pegasus driveways
KERBY can suit a range of Pegasus properties and vehicle requirements.
Residential driveways
A smoother everyday transition for cars, SUVs and utes.
Wider entrances
Multiple sections can be combined to provide the required coverage.
Curved driveways
Mitred sections can follow changes in driveway direction.
Trailers and boats
A smoother approach can make access easier for longer vehicles.
Newer properties
KERBY can provide a permanent solution where a newly constructed driveway has an abrupt kerb transition.
KERBY Pegasus: built for a smoother entrance
You don't have to accept the driveway bump as part of owning a house in Pegasus.
KERBY Pegasus: made to fit
From a simple straight entrance to a straight-to-curve configuration, KERBY provides a permanent aluminium solution designed around the actual driveway.
Designed in Selwyn. Made in New Zealand. Professionally installed in Pegasus.
INSTALLATION AREAS
Selwyn & Canterbury
KERBY.NZ supplies and professionally installs driveway kerb ramps throughout Rolleston, Lincoln, West Melton, Prebbleton, Selwyn, Pegasus, Ashburton and surrounding Canterbury areas.
BUILT AROUND YOU
Custom Installation
Straight runs, slight curves, tight curves, multiple sections and custom configurations. KERBY can be adapted on site to suit the actual driveway.
KERBY Driveway Kerb Ramps in Pegasus
Pegasus driveways can have wider entrances, curves and changing driveway geometry that make a standard straight kerb ramp unsuitable. KERBY provides a permanent aluminium driveway kerb ramp system that can be configured to suit the shape and width of your driveway.
Designed in Selwyn, made in New Zealand and professionally installed locally, KERBY provides a smoother transition between the road and your Pegasus driveway.
The Pegasus driveway kerb problem
A driveway entrance doesn't always meet the road in a simple straight line.
Where the kerb curves, changes direction or extends across a wider entrance, the transition can become awkward for everyday vehicles.
You might experience:
-
A sharp bump entering or leaving the driveway
-
Scraping underneath lower vehicles
-
Impact through tyres, wheels and suspension
-
Awkward trailer or boat access
-
Difficulty negotiating curved entrances
-
Noise and vibration every time you cross the kerb
It's easy to think that's simply how the driveway is.
It isn't something you necessarily have to live with.
READY TO FIX YOUR DRIVEWAY?
Stop dealing with scraping, jolting, and awkward driveway angles every single day.
KERBY™ delivers a smoother, stronger, and more permanent solution designed specifically for NZ driveways and semi-mountable kerbs. Professionally installed, built to last, and made to look good doing it.
Send through a photo of your driveway and let’s see what’s possible.
📸 Send a Driveway Photo
The fastest way to get started. Send a few photos of your driveway and we’ll assess the best KERBY™ solution for your access point.
💬 Ask a Question
Not sure what option you need? Ask anything about installation, fitment, pricing, or driveway suitability.
📅 Request a Quote
Ready to fix the problem properly? Request a free quote for your driveway installation today.
Real KERBY installations in Pegasus
KERBY isn't theoretical.
A real KERBY installation in Pegasus
KERBY has been professionally installed in Pegasus, including a driveway configuration where a straight section transitions into a curve.
This type of installation demonstrates why KERBY is more than a simple straight ramp.
The modular sections can be arranged to follow the driveway and provide continuous coverage where the entrance changes direction.
A smoother way into your Pegasus driveway
KERBY is a purpose-built aluminium driveway kerb ramp system designed for permanent installation over suitable existing kerb profiles.
A smoother way into your Pegasus driveway
KERBY is a purpose-built aluminium driveway kerb ramp system designed for permanent installation over suitable existing kerb profiles.
The system uses high-strength T6 aluminium extrusion, designed in Selwyn and manufactured in New Zealand.
Rather than allowing wheels to drop abruptly over the kerb, KERBY creates a smoother transition between road and driveway.
The result:
Less impact. Less scraping. Smoother access.
And because KERBY is professionally installed, it can be configured around the actual driveway rather than forcing a standard straight ramp into an awkward space.